88 boulevard de Picpus - Paris 12è - 7j/7 de 10h à 19h - Tél. 01 43 46 35 32

OpenRepro : The Stool

To make the stool you will need:

1 Tab box
Japanese saw
Brush, pencil, meter
14 mm wood wick
Drill or column drill

Read more…

Concrete and Cement

Cement is a 19th century invention, it is a binder that hardens under the action of water, today most often used in the manufacture of reinforced concrete, or mortar.

It is composed of limestone and clay which, mixed with water, is taken and allows to combined sands and aggregates between them and thus constitute real artificial rocks, concretes and mortars.

Cement is a concrete constituent. It is a mixture of clay and limestone through which the different components of concrete can bind together.

The concrete is the material made from a mixture of several constituents: water, sand, gravel and cement.

Six Nations teaser shot at l’Établisienne

Réalisation : Simon Gemelli – Bande Annonce France 2/ France 4 Tournoi des 6 Nations 2018

Les Confettis – volume 1 / 2016

 

 

 

 

“L’établisienne, empreinte d’une atmosphère créative, se dédie aux manuels qui ont besoin de s’exprimer, mais se fait aussi lieu de rencontres et de discussions pour les passionnés”

Glue

Little story of glue !

The glue was invented in ancient Egypt and has continued to evolve and improve, it is divided into different categories, they are three in number: the reactive adhesives, non-reactive adhesives, coatings and mortars.

The non-reactive adhesives when applied, are already present in their final chemical state. No chemical reaction thus occurs in the physical curing process is done by evaporation of solvent, water or by cooling. Non reactive sizes have a variety of adhesion properties, good flexibility and the bonding can be used in multiple applications.

There are four main types of physical curing adhesives: aqueous or solvent-based adhesives which harden by evaporation of water or solvent contact adhesives hot melt adhesives or “Hot Melt” the hotmelt self-adhesive or “HMPSA”. Reactive adhesives like the non-reactive sizes require a chemical reaction in order to pass from the liquid to the solid state.

Once cured, have generally a high resistance to temperature, moisture and many chemicals. The different types of chemical curing adhesives are: polyurethane adhesives mono and bi-component; adhesives based on epoxy resin mono and bi-component; cyanoacrylates; glues based silylated polymers; silicone adhesives. Plasters and mortars on them, they are formulated based plaster or cement for laying tiles or preparation of floors and walls before the establishment of a coating.

On line workshops

We offer training on how to use certain tools of the workshop, review the concepts learned or improve certain practices.

Three types of online workshops are offered but only in french :

  • Open: Free and available at leisure,
  • Free on registration: registration is required of you but access is free,
  • Reserved: you are asked a registration and e-participation.

Ateliers-en-ligne

 

To rent a workshop in Paris

A shooting, training, meeting, product launch …. to organize your events, we propose to privatize all or part of the Etablisienne.

Read more…

La passion de la brocante -France TV

<iframe frameborder=”0″ width=”480″ height=”270″ src=”//www.dailymotion.com/embed/video/x2r451d?start=127″ allowfullscreen></iframe><br /><a href=”http://www.dailymotion.com/video/x2r451d_la-passion-de-la-brocante_news” target=”_blank”> La passion de la brocante</a> <i>par <a href=”http://www.dailymotion.com/francetvinfo” target=”_blank”>francetvinfo</a></i>

Available Tools

Measure, mark, cut, thread, assemble …

Journée Atelier Libre Service - L'EtablisienneTraditional tools are included in the rental self-service. Unless otherwise stated the use of power tools can only be done on site.

The price for digital tools depends on time/machine

Consumables (sandpaper, nails, glue, screws …) are not included but available for purchase.

If you can not find the tool or accessory you need below, please tell us …

Read more…

Planchotheque, materials new life

Waste can be your materials

You are more and more members to come to work or  learn at L’Établisienne. So we produce together more pieces of wood, which are in a first time reused for Upcycling or tests.

But when they can no longer be useful to us, they are wastes.

So L’Établisienne launches PLANCHOTHEQUE, for students and tinkerers who want to recover free scrap wood.

There’s something for everyone, you just have to search to find your happiness.

To be informed of the next appointments PLANCHOTHEQUE, follow us on our Facebook page of L’Établisienne.

Tools of the upholsterer

Tapestry tools:

  • Doe’s foot
  • Scissor to be stripped
  • Snatchestaples
  • Ramponneaux
  • Strap tendor
  • Pulls hair
  • scissors
  • Needles
  • Ouzeaux
  • Sewing machine

Available consumables:

  • String to sting
  • Sguinder rope
  • Strong web
  • Entangled web
  • Jaconas
  • White canvas
  • Seeds
  • Animal Lily
  • Strap
  • quilted
  • Elancrin
  • Resorts

Sewing machine

A sewing machine easy to use

> Automatic Machine-a-coudre_Location--DIY_L-Etablisienne-Paristhreading of the needle

> Double height of crowbar

> Lowering drive claws for repair

> Jersey stitches for sewing stretchfabrics

> Super utilitarian points (invisible hem)

> 17 programmes

> Automatic button in 4 times

> The width of the zig zag point adjustable up to 5 mm

> Length of adjustable point up to 4 mm

> Several needle positions

> Fine-tuning for delicate fabrics

 

 

Wood : carpenter, cabinet-maker…

A material long used by men

Wood has always been favored for construction, furnishing, or for insulation or heating. Mulberry bark was used for paper by the Chinese. Also, wood always had an important place in art.

  • Construction :

Wood is an essential material in architecture, used in every type of construction from parquet floor to framework. Houses and buildings are always more or less made of wood, as well as pieces of furniture, boats, musical instruments...

Wood is used so much because it has many benefits : robust, insulating, durable, ecological thanks to sustainably managed forests, also pleasant to use. Moreso, some problem inherent to its use have now been counteracted : for instance, wood-eating organisms are now disposed of with specific products.

  • Cabinet :

The cabinetmaker and the carpenter don’t work the same way. The carpenter makes pieces of furniture or solid wood structures, while the cabinetmaker, after having built a wood structure, covers it with a thin layer of fine wood, called veneer. The cabinetmaker ths has to pay attention to the different natures and shapes of wood all throughout the process of creation.

  • Marquetry :

Marquetry is another wood art, it’s a decor the marquetry cabinetmaker builds from veneer, after a drawing, in order to give them a particular shape. He then assembles them, forming a whole that will be pasted on a support, like a painting or a piece of furniture.

That art developed especially during the Trecento in Italia, then was used a lot for Louis XIV and Louis XV style furniture.

The different types of wood

  •  Trees :

Based on the weather, different trees develop and generate different types of wood. With a temperate climate, we will have conifers such as pine, and fir, or hardwood such as aspen or birch. Some, like fruit trees, among others, are not grown for their wood, like cherry for example, but they can still be useful in cabinetmaking and marquetry.

  •  Types of wood specific to certain uses :

 The most common types of wood

 Oak is the traditional type of wood for framework, along with chestnut and spruce, for they don’t rot. Oak was also used a lot in naval construction.

Charm and maple are very useful for heating, because they produce more heat per cubic meter than most types.

Cabinetmaking types of wood

 Cherry is a light brown wood that can replace mahogany, and is used to make solid furniture in carpentry, as well as veneering.

Walnut is a low density, colorful and veined wood, favored for veneering.

Maple is a very light, almost white wood, and one of the most favored type for cabinetmakers.

Plane tree is a light, solid and moisture resistant type, although a bit dificult to use sometimes.

Fir is a light and quite solid wood, used for solid furniture, and also for parquet floors and stairs.

Exotic wood, such as mahogany, ebony, yew and lemon tree, is especially used in marquetry[:] Read more…

Laser : GCC, Mercury III

Laser Cutting and Engraving

Decoupe-Laser_Cours-stage-apprendre-DIY_L-Etablisienne-Paris

 A laser cutting is a process which allows extremely precise cutting of many materials.

The machine of the Etablisienne, a Mercury III of GCC, allows you to cut and engravings in the wood, plexiglass, cardboard, paper, leather

Read more…

Filaments for 3D Printing, the PLA

PLA-Impression3D_filament_imprimante-3D_L-Etablisienne-ParisPLA, polylactic acid, is a fully biodegradable polymer resulting from the fermentation of sugar or starch as a result of synthesizing lactic acid bacteria.

PLA is used in food packaging and in the manufacture of many injected, extruded or thermoformed articles.

The PLA is the material used by the 3D printer at l’Etablisienne.

You will find the description of the other “printable” materials on website 3ders.org

Multi rotary tools

Multi rotary tools

Outil rotatif sans fil 225Powerful and quick rotating motor (up to 35 000 r / min) for fast work progress. Cutting, grinding, polishing …

 

Drill press

 

 Drill press

Perceuse a colonneThis drill press can be tilted to the right and left, front-back translation and retractable. The table and the spindle are very easily adjustable.

 

 

 

 

  • Table: inclination of -45 ° to + 45 °
  • Distance table – chuck: max 365 mm
  • Distance stand – max 485 mm chuck
  • Distance spindle – column of 125 to 445 mm
  • Throat: 320 mm radial adjustment
  • Gooseneck: inclination of -70 ° to + 60 °

La Maison France 5

For a special emission , Michel Cymes and Stéphane Thebauten came visit l’Etablisienne. Follow them with HLProduction video for La Maison France 5.

OpenRepro : the console-workbench

Atelier palette a l'etablisienne- ParisTo make the console-established, it takes 2 pallets of 120 x 80 cm

You can use it as a console in your home or garden or to tinker.

Final dimensions: 90 x 120 x 48.

How to make it 

Woodworking : the miter saw

The mitter saw

Scie à onglet

  • Miter angle of 52 ° left / 60 ° right for cuts in the most different angles
  • Tilt saw head for miter cuts up to 47 ° left and right

Visit of the Établisienne by Marie Claire

A report made by Marie Clair idées to discover the Établisienne.

Planer – Thicknesser

For planing your boards, the planing-planer is available for rent.

You can train this machine on request, during a workshop.

Read more…

Wood lathe

Tour à boisTraining lathe is provided on request during a workshop .

This machine is available for rent  for € 1 additional hour.

Distance between centers: 410 mm

Height of centers: 152 mm,

Diameter 300 mm above the bench

Diameter 235 mm pitches in the tool holder.

Plate joiner

Plate Joiner

Lamelleuse_Milwaukee_PJ_710-r_Location-Atelier_L-Etablisienne-Paris

Compact and lightweight for great handling and easy use

A reclining sole from 0 to 90 degrees with locking lever and quick stops on 22.5 degrees -45 degrees AND 66.5 degrees

To learn how to use this tool : watch the on line training (only in french)

Electric saws

Cordless circular saw :

Scie circulaireA summary of mobile power.

Cutting Capacity at 90 ° 51 mm
Depth of cut at 45 ° 40mm

Parallel stop

Guide rail

Workshop : Circular saws

Cordless jigsaw :

Scie sauteuse BoschJigsaw cordless piercing extremely compact: perfect handling, even for curved cuts in tight spaces. Unobstructed view of the cutting line with LED lighting and powerful function of wind performance chips.

Gradual easing function for a perfect primer for sawing and precise plunge cuts.

Workshop : Cutting and assembly ; this tool is also used to cut cardboard

Hight precision grinding machine

Adjustable upwards by 10° and downwards by 50°

  • Guide slot
  • Angle stop

 

Source : Manuel TG  125 et http://www.proxxon.com/eng/html/27060.php

Fine application table saw

  • Expandable table with built-in auxiliary stop.
  • Adjusting the height and angle of the blade
  • Longitudinal stop, 1/10mm setting
  • Angular stop, built-in tightening for exact reproduction

    Source : Manuel Proxxon et http://www.proxxon.com/eng/html/27070.php

 

OpenRepro l’Etablisienne Desk

Inspired by the soul of the place, with Jean of Ateliers Jisseo, we have created a new range of furniture.

Comptoir EtablisienneTo begin with, we are pleased to provide you with the plans of the most iconic furniture of the workshop Etablisienne: the counter.

Plans OpenRepro countertop PDF:
openrepro-comptoir-l-etablisienne-v20901

Woodworking : routers

Stage défonceuse Etablisienne Paris BOSCH breakers

Five breakers are available in the workshop.

To discover this tool, we offer a  two hour collective training.

900 W 1250 W or 1400 W engines and constant electronic regulation for a consistent work progression.

Micrometric adjustment system for an accurate adjustment of milling depth in 1/10mm tiers with fixed diving system.

Accessories available:
> Copyring ring 13,17,24, 27, 30 and 40 mm

In PDF, the lists and description of Strawberries-to-roll and Strawberries-without-rolling

 

Woodworking : Table saws

Table saws

Scie sur tableThis tool is restricted to those who have completed training or can demonstrate previous experience

Table size 584 x 759 mm

Rear, left and right extension

Self-adjusting parallel stop for precise cuts

Precise adjustment of the angle of the blade

 

Read more…